3/16" Brass Compression Unions are used in low-pressure applications such as air, oil, and water. They are generally used to connect lengths of copper, brass, and aluminum tubing. To make the connection, place the nut and then the sleeve over the tubing and then insert a tube into the fitting body.

3/16 Brass Compression Union

Description

Compression unions are used in low pressure application such as: air, oil, and water. They are generally used to connect lengths of copper, brass, and aluminum tubing. To make connection, place the nut and then the sleeve over the tubing and then insert tube into the fitting body. When tight, the wedging action of sleeve between body and nut create a leak free connection. Use for joining 3/16 copper, brass, or aluminum tubing in low-pressure applications (NOT brake lines).

Specifications

Compression Sleeve Inside Diameter: 3/16 in
End 1 Type: Ring
End 2 Type: Ring
Finish: Brass
Material: Brass
SAE Approved: Yes
Thread Type #1: SAE

Interchanges

FMSI Universal: 2955

AGS CF-2 'Gator Gripper Compression Fitting

CF-4B by AGS COMPANY - Brass compression union, 3/8, 1/bag

Ags Steel Tube Nut, Long, 3/16 (3/8-24 Inverted), 100/box BLFX-10

Compression Fitting AGS CF-1

Brass Compression Union, 3/16 – AGS Company Automotive Solutions

AGS 3/16in Tube Union Compression Fitting

Brass Compression Tube Fitting, Union, Brake Line

Ags Steel Tube Nut, 3/16 (M10x1.0 Inverted), 1/bag BLF-40B

AGS Company Brass Compression Union, 3/16 1/Card

Steel Brake Line Union, 3/16 (3/8-24 Bubble) – AGS Company

American Grease Stick Co. Steel Tube Nut, 3/8 (M16x1.5 Surface

Needa Parts Brass 3/16in Inverted Flare